0

News

Making the Woven Bundle With Closure

Making the Woven Bundle With Closure

  • Saturday, 13 June 2020
  • 0
  • 9492
  • 0

Making the Woven Bundle With Closure

You will need to follow the steps that are detailed in this article in order to prepare the weave bundle with closure that you need for your fireplace. A type of closure that is used for your weave bundle with closure is one that comes with a tool that allows you to turn it into a bit so that you can open and close it without it coming out of the middle of the weave of your bundle.

The tool that you will need is called a coping tool. This tool consists of a cylinder that is two inches long and can come with a flat end and a pointed end. You will be able to use the flat end to turn the cylinder to a tool that allows you to open and close the coil of the weave bundle with closure.

Make sure that you hold the cylinder about two inches away from the edge of the bundle. You will be using the flat end of the coping tool to turn the cylinder to the tool that you will use to turn the coil.

When you are turning the tool, you will need to hold the cylinder up by the bottom edge of the cylinder. This is to make sure that the cylinder is level. When you have turned the tool, you will want to pull the cylinder back toward the pointed end of the cylinder.

The point of the coping tool is to allow you to open the coil of the weave bundle with closure. The flat end will have a cut out on the flat end of the cylinder that is where you will be cutting into the wire.

Keep the flat end of the coping tool touching the wire that is under the coil. You will need to make sure that you are working along the flat end of the wire to cut the coil.

You will want to continue to pull the flat end of the coping tool along the wire until you can get a small cut in the wire. This cut will be about a quarter of an inch long. Use a pair of pliers to get a hook on the wire.

Turn the hook over and hold the hook up and bring the flat end of the coping tool over the hook. With the flat end of the coping tool pressing against the hook, pull the hook back. The hook will be the part of the coil that you will be using to push down the coil that is in the middle of the weave bundle with closure.

Tags:wholesale deep wave bundles with closure | weave bundle with closure suppliers

0users like this.

Leave a Reply